Internship in USM

 We started the cutting and welding for the display stand project today. we followed the same procedure as the drone monitor stand. Also, we saw the 3D printer that was working.  After lunch, we joined a discussion with Mr. Zihad. It was about the paper airplane event at the elementary school. Thank you for the valuable experience. The atmosphere was very relaxed, and they emphasized to us that it was a discussion, not a meeting hahaha

 We continued assembly for the drone monitor stand. In the morning, we drilled the screw holes by a machine. We were able to drill the hole perfectly. After that, we did welding of the pole to be installed in the centre. After wiping the oil from the pillar, I painted it yellow. This completes one of our projects. It has ben a very successful experience. 

 We went to the workspace in the aerospace buildingsAfter finalizing the design for the drones monitor stand,  We went to the workspace in the aerospace building to start the fabrication. In the morning, we did the process of cutting the materials. the drones monitor stand consists of six parts. Mr. Shukuri cut the materials, and After that, we sanded the cut pieces of material.  After lunch break, we began welding. I studied mechanical engineering, so I had seen welding before, but it was first time in about five years. it's impressive to see something I designed come together.    

 Today, I continued remodeling the gas turbine mount, just like yesterday. I've finished remodeling it in this evening, I changed it to 2D drawing. When I first started using fusion360, I didn't know about assemblies, so I designed without using it. But now I can use this function, so I exported 3D to 2D more easily than before. 

 We completed five mechanical designs last week. Today, We held a discussion regarding tehse items. I reviewed the mount of gas turbine and the stand for drone monitor with Mr.Zihad. Following discussion,  I changed the design for the drone monitor stand, as it lacked sufficient stability. I added another support post. I also changed the connection from welding to bolts where the posts join the main monitor support. original design revised desgin We tried to control a drone in the evening. It was my first time, as I've never had the chance before because the drone regulations in Japan is very strict. I was so excited!! Mr. Zihad taught me hoe to use the controller. After that, we went to a field to fly the drone. Sakai did first and then I  did. Whenever we made a mistake with the controls, Mr. Zihad would take over. I felt the adrenalin rush. It was a valuable experience. 

 Ww went to the main campus with Rohani san in this morning. Because we have to complete the VISA application. It was second time to go to the main campus. We went to VISA department. There are so many national people in it. We tried to complete all the procedures before lunch break but We couldn't. So, We've had lunch in cafeteria.  I ate nasigoreng. It was delicious but more expensive than engineering campus cafeteria. There are many cafeterias and coffee shops in the main campus.  I finished 3D designing of the gas turbine mount. But I cannot convert 3D to 2D well. I will have to do it tomorrow. I have 4 tasks besides this. I'm feeling rushed, but I will steadily move forward with the tasks.